上星期六,家裡Jacq3D提花機換了一個新龍頭後,還是有狀況。這次是亂提綜絲或是沒反應,我忽然領悟到這是氣溫太高導致電路秀逗的症狀。記得丹麥朋友提到夏天使用提花機TC-1時會發生不正常的狀況,裝設冷氣後維持在攝氏二十多度才解決問題。所以趕緊安排電氣行來裝冷氣,果然冷氣一吹,折騰一年半的所有問題霎時消失了!!!
實在是太──神──奇──了!!!
Those grey blocks are created by the wrong lifting. The most amazing thing happened when the room temperature dropped. The loom acts almost perfectly. For one and half years, this is the first time that the loom weaves flawlessly. I am very happy!!!
上圖中灰色色塊是提綜錯誤的結果。現在覺得Jacq3D提花機有希望了。
Now I wove two panels of a new work--"Window-1". There will be four panels to piece a set of window. To see how these two panels look, I pin them on the wall and put the UV light on. Then, here is the simulation of it.
這幾天開始織「窗之一」,是窗系列的第一件,由四片拼成。目前已織完三片,但是第一片太短,要重做。下面影片是已織完的兩片的光照效果,因為只是臨時貼在牆面,還沒裝裱,所以外形有點歪曲。影片是模擬出預計的轉換效果。
I wish to weave a series of windows. This time I use reflective thread in stead of stainless steel.
沒有留言:
張貼留言